Archives 2020

Japanese earthquake death toll surpasses ten thousand

Friday, March 25, 2011

The death toll from the Sendai earthquake has now increased to over ten thousand. In Japan, the National Police Agency has stated that 10,019 are now known to have been killed as a result of the disaster.

The Agency also reported that 2,775 had been injured and the location of 17,541 individuals was unknown. Meanwhile, 1,900 evacuation sites are now thought to be occupied by approximately a quarter of a million people.

When the event happened two weeks ago, 18,000 thousand households were destroyed and 130,000 were damaged by the earthquake and the subsequent tsunami. In spite of this, twelve of the fifteen north-eastern ports of Japan have recommenced operating, while the majority of the oil terminals of the country remained open, according to Inchcape Shipping Services.

Amongst the aftermath of the earthquake, plant number 3 at the Fukushima I Nuclear Power Plant is suspected to have been damaged and may be releasing radiation. The Japanese government have reported that an ongoing investigation is occurring to attempt to discover the cause of the radiation leak at the power plant. Chinese authorities have reported two Japanese tourists were found to have levels of radiation “seriously exceeding limits” on their clothing and luggage. In Tokyo, the amount of radiation in the supply of water has decreased, however it remains high in various parts of the north of Japan.

According to BBC News Online, two workers were hospitalised because of the leak. The Tokyo Electric Power Company (TEPCO), who operate the building, reported that three employees placing electrical cables at the location were given treatment for being exposed to radioactive water; they had experienced ten thousand times the regular amount of radioactivity. Of those three men, beta rays caused two of them to receive burns. The two individuals did not stop working despite meters advising of unsafe radiation levels. It was later discovered that they were wearing inadequate protective footwear and failed to draw their attention to a radiation alert. TEPCO has since received government orders to improve worker management.

The radiation emitted from the plant has had a significant effect on the Japanese food industry. In the surrounding areas of the plant, shipments of foodstuffs have been prohibited. In Fukushima prefecture, residents have been advised not to consume eleven leafy green vegetable types produced locally due to radiation concerns. There has also been a significant decrease in customer demand at a fish market in Tsukiji.

Japanese product importers have discovered some foodstuffs to have a small radiation amount, which is not thought to be potentially deadly. Numerous Asian countries, the European Union, Australia, Russia and the United States have prohibited milk items, seafood and vegetables from being imported from various Japanese prefectures.

Closing the power plant down may take at least one month to achieve. Speaking to AFP, an individual talking on behalf of TEPCO stated that the company is “still in the process of assessing the damage at the plant, so that we can’t put a deadline on when the cooling operations will work again”. Residents living within thirty kilometres of the plant have been advised to avoid going outdoors to attempt to prevent radiation exposure as far as possible.

Windows Embedded Compact 2013 Bsp Support For Nxp I.Mx 6x Platform}

Windows Embedded Compact 2013 BSP Support for NXP i.MX 6x Platform

by

iwave systems technology Windows Embedded Compact 2013 BSP Support for NXP i.MX 6x PlatformiWave Systems, a genuine embedded service provider, offers support for Windows Embedded Compact 2013 (WEC2013) reference Board Support Package (BSP) for NXP i.MX6x Platform. Microsoft has released Windows Embedded Compact 2013 (WEC2013) OS which gives better performance than its previous version WEC7. It is designed to target intelligent devices.These devices range from enterprise tools, such as industrial controllers, communications hubs, and point-of-sale terminals to consumer products such as cameras, telephones, and home entertainment devices.Windows Embedded Compact 2013 is a streamlined, componentized device operating system. With support for x86 and ARM architectures, Windows Embedded Compact 2013 provides the flexibility and real-time support to help device manufacturers reduce time to market while creating easy-to-use, multi-touch intelligent systems that help enterprises improve worker productivity.Windows Embedded Compact 2013 on iWave’s NXP i.MX6X Platform:Windows Embedded Compact 2013 provides many new features, such as including support for the latest version of Visual Studio, networking stack improvements, and XAML improvements. This latest version of Visual Studio 2012 includes new arm compiler and latest C Run time libraries.With the latest Windows Embedded Compact 2013 OS, the BSP and environment will have the following improvements:Platform Builder and Application Builder in Visual Studio 2012Support for .NET Compact Framework Version 3.9Multiple Processor Support (SMP)Hard real-time support in the OSFaster file system supportIncreased networking throughputFast Boot and Snapshot bootThe various peripheral features supported in the BSP are listed below;Debug UARTWi-Fi((Open, WEP 64/128 bit, WPA2 AES/TKIP, WPA AES/TKIP modes), Power Save and Roaming Feature)BT V2.1(Serial Port, Obex FTP, Head Set and HID profiles )EthernetLVDS displayHDMISATASD/MMCUSB HostUSB deviceCameraAudioTouchPCie

WEC2013 on NXP i.MX6 SABRE SDP and iWave-Rainbow-G15D Qseven Platform

[youtube]http://www.youtube.com/watch?v=5PbscRpWOPA[/youtube]

iWave provides WEC2013 BSP support for below mentioned i.MX6x based platforms,WEC2013 on NXP i.MX6 SABRE SDPWEC2013 on i.MX6 iWave-RainboW-G15D platform

WEC 2013, Wince 2013, Wince, Windows Embedded Compact,Windows Embedded Compact 2013 ,Windows CE , Windows CE 2013 , Sabre SDP , imx6q sabre, NXP imx6q sabre sdp board,

Freescale imx6q sabre sdp board , Sabre SDP Quad, Sabre SDP Dual , imx6d sabre sdp

iWave Systems Technologies, an ISO 9001:2008 certified company, established in the year 1999, focuses on standard and customised System on Module/SBC product development in Industrial, Medical, Automotive & Embedded Computing application domains. iWave Systems also provides comprehensive Engineering design services involving Embedded Hardware, FPGA and Software development.

iWave’s Hardware expertise spans complex board design up to 30 layers; Analog , Digital & RF Designs; FPGA Development up to 3+ million gates and VHDL / Verilog RTL Development & Verification. Our Software expertise ranges from OS Porting, Firmware & Device Drivers Development and Wireless & Protocol Stacks to Embedded Application Development.

The company designs and develops cutting edge products and solutions. iWave has been an innovator in developing highly integrated, high performance, low power and low cost System-On-Modules(SOM) and Development Platforms. iWave has been able to develop advanced products for its customers using its SOMs in the shortest possible time at the most optimized design cost.

iWave Systems Technologies, an ISO 9001:2008 certified company, established in the year 1999, focuses on standard and customised System on Module/SBC product development in Industrial, Medical, Automotive & Embedded Computing application domains. iWave Systems also provides comprehensive Engineering design services involving Embedded Hardware, FPGA and Software development…

Article Source:

eArticlesOnline.com}

Payment pending; Canadian recording industry set for six billion penalties?

Wednesday, December 16, 2009

A report published last week in the Toronto Star by Professor Michael Geist of Canada’s University of Ottawa claims a copyright case under the Class Proceedings Act of 1992 may see the country’s largest players in the music industry facing upwards of C$6 billion in penalties.

The case is being led by the family and estate of the late jazz musician Chet Baker; moving to take legal action against four major labels in the country, and their parent companies. The dispute centres around unpaid royalties and licensing fees for use of Baker’s music, and hundreds of thousands of other works. The suit was initially filed in August last year, but amended and reissued on October 6, two months later. At that point both the Canadian Musical Reproduction Rights Agency (CMRRA) and Society for Reproduction Rights of Authors (SODRAC) were also named defendants.

January this year SODRAC and CMRRA switch sides, joining Baker et al. as plaintiffs against Sony BMG Music, EMI Music Canada, Universal Music Canada and Warner Music Canada. David A. Basskin, President and CEO of CMRRA, with a professional law background, stated in a sworn affidavit that his organisation made numerous attempts over the last 20 years to reduce what is known as the “pending list”, a list of works not correctly licensed for reproduction; a list of copyright infringements in the eyes of the Baker legal team.

The theoretical principle of the list is to allow timely commercial release while rights and apportionment of monies due are resolved. Basskin complains that it is “economically infeasible to implement the systems that would be needed to resolve the issues internally”. And, “[…] for their part, the record labels have generally been unwilling to take the steps that, in the view of CMRRA, would help to resolve the problem.”

The Baker action demands that the four named major labels pay for and submit to an independent audit of their books, “including the contents of the ‘Pending Lists'”. Seeking an assessment of gains made by the record companies in “failure or refusal to compensate the class members for their musical works”, additional demands are for either damages and profits per the law applicable in a class action, or statutory damages per the Copyright Act for copyright infringement.

[…] for their part, the record labels have generally been unwilling to take the steps that, in the view of CMRRA, would help to resolve the problem.

This forms the basis for Professor Geist’s six billion dollar calculation along with Basskin’s sworn testimony that the pending lists cover over 300,000 items; with each item counted as an infringement, the minimum statutory damages per case are CA$500, the maximum $20,000.

Basskin’s affidavit on behalf of CMRRA goes into detail on the history leading up to the current situation and class action lawsuit; a previous compulsory license scheme, with poor recordkeeping requirements, and which, had a decline in real terms to one of the lowest fees in the world, was eventually abolished and the mechanical license system introduced. The CMRRA went on to become a significant representative of music publishers and copyright holders, and the pending list an instrument to deal with situations where mechanical rights were as-yet not completely negotiated. Basskin’s affidavit claiming the list grew and circumstances worsened as time progressed.

The Mechanical Licensing Agreement (MLA) between the “majors'” industry body, an attached exhibit to the affidavit, is set to expire December 31, 2012; this is between CMRRA and the Canadian Recording Industry Association (CRIA). With the original MLA expiring at end September 1990, CMRRA negotiated more detailed terms and a “code of conduct”. Subsequent agreements were drawn up in 1998, 2004, 2006, and 2008.

Basskin asserts that the named record company defendants are the “major” labels in Canada and states they “are also responsible for creating, maintaining and administering the so-called “Pending Lists” that are the subject of the current litigation”; that, specific to publishing, divisions of the four represent the “‘major’ music publishers active in Canada”. Yet the number of music publishers they represent has decreased over time due to consolidation and defection from the CRIA.

Geist summarizes the record company strategy as “exploit now, pay later if at all”. This despite the CMRRA and SODRAC being required to give lists of all collections they represented to record labels, and for record labels to supply copies of material being released to permit assessment of content that either group may represent interested parties for. Where actual Mechanical License Agreements are in place, Basskin implies their terms are particularly broad and preclude any party exercising their legal right to decline to license.

Specific to the current Mechanical Licensing Agreement (MLA) between the CMRRA and the CRIA; a “label is required to provide an updated cumulative Pending List to CMRRA with each quarterly payment of royalties under the MLA.” The CMRRA is required to review the list and collect where appropriate royalties and interest due. Basskin describes his first encounter with pending lists, having never heard of them before 1989, thus:

[…I]n the early years of my tenure, CRMMA received Pending Lists from the record labels in the form of paper printouts of information. The information contained on these lists varied from record label to record label, [… i]n fact, within a few days after my arrival at CMRRA, I recall my predecessor, Paul Berry, directing my attention to a large stack of paper, about two feet high. and informing me that it was PolyGram’s most recent Pending List. Prior to that introduction I had never heard of Pending Lists.

Alain Lauzon, General Manager of Canada’s Society for Reproduction Rights of Authors, Composers and Publishers (SODRAC) submitted his followup affidavit January 28, 2009 to be attached to the case and identify the society as a plaintiff. As such, he up-front states “I have knowledge of the matters set out herein.” Lauzon, a qualified Chartered Accountant with an IT specialisation, joined SODRAC in 2002 with “over 20 years of business experience.” He is responsible for “negotiation and administration of industry-wide agreements for the licensing of music reproduction and distribution”; licensing of radio and online music services use is within his remit.

Lauzon makes it clear that Baker’s estate, other rightsholders enjoined to the case, SODRAC, and CMRRA, have reached an agreed settlement; they wish to move forward with a class proceeding against the four main members of the CRIA. He requests that the court recognise this in relation to the initially accepted case from August 2008.

The responsibility to obtain mechanical licenses for recordings manufactured and/or released in Canada falls with the Canadian labels by law, by industry custom, and by contractual agreement.

The preamble of the affidavit continues to express strong agreement with that of David Basskin from CMRRA. Lauzon concurs regarding growing use of “pending lists” and that “[…] record labels have generally been unwilling to take the steps that would help to resolve the Pending List problem.”

With his background as an authority, Lauzon states with confidence that SODRAC represents “approximately 10 to 15% of all musical works that are reproduced on sound recordings sold in Canada.” For Quebec the figure is more than 50%.

Lauzon agrees that the four named record company defendants are the “major” labels in Canada, and that smaller independent labels will usually work with them or an independent distribution company; and Basskin’s statement that “[t]he responsibility to obtain mechanical licenses for recordings manufactured and/or released in Canada falls with the Canadian labels by law, by industry custom, and by contractual agreement.”

Wikinews attempted to contact people at the four named defendant CRIA-member record labels. The recipient of an email that Wikinews sent to Warner Brothers Canada forwarded our initial correspondence to Hogarth PR; the other three majors failed to respond in a timely fashion. Don Hogarth responded to Wikinewsie Brian McNeil, and, without addressing any of the submitted questions, recommended a blog entry by Barry Sookman as, what he claimed is, a more accurate representation of the facts of the case.

I am aware of another viewpoint that provides a reasonably deep explanation of the facts, at www.barrysookman.com. If you check the bio on his site, you’ll see that he is very qualified to speak on these issues. This may answer some of your questions. I hope that helps.

Sookman is a lobbyist at the Canadian Parliament who works in the employ of the the Canadian Recording Industry Association (CRIA). Hogarth gave no indication or disclosure of this; his direction to the blog is to a posting with numerous factual inaccuracies, misdirecting statements, or possibly even lies; if not lies, Sookman is undoubtedly not careful or “very qualified” in the way he speaks on the issue.

Sookman’s blog post opens with a blast at Professor Geist: “his attacks use exaggeration, misleading information and half truths to achieve his obvious ends”. Sookman attempts to dismiss any newsworthiness in Geist’s article;

[… A]s if something new has happened with the case. In fact, the case was started in August 2008 (not October 2008 as asserted by Prof. Geist). It also hasn’t only been going on “for the past year”, as he claims. Chet Baker isn’t “about to add a new claim to fame”. Despite having started over a year and a half ago, the class action case hasn’t even been certified yet. So why the fervour to publicise the case now?
HAVE YOUR SAY
Should the court use admitted unpaid amounts, or maximum statutory damages – as the record industry normally seeks against filesharers?
Add or view comments

As the extracted [see right] stamp, date, and signature, shows, the court accepted amendments to the case and its submission, as Professor Geist asserts, on October 6. The previously mentioned submissions by the heads of CMRRA and SODRAC were indeed actions within the past year; that of SODRAC’s Alain Louzon being January 28 this year.

Sookman continues his attack on Professor Geist, omitting that the reverse appears the case; analysis of his blog’s sitemap reveals he wrote a 44-page attack on Professor Geist in February 2008, accusing him of manipulating the media and using influence on Facebook to oppose copyright reform favourable to the CRIA. In the more current post he states:

Prof. Geist tries to taint the recording industry as blatant copyright infringers, without ever delving into the industry wide accepted custom for clearing mechanical rights. The pending list system, which has been around for decades, represents an agreed upon industry wide consensus that songwriters, music publishers (who represent songwriters) and the recording industry use and rely on to ensure that music gets released and to the market efficiently and the proper copyright owners get compensated.

This characterisation of the pending list only matches court records in that it “has been around for decades”. CMRRA’s Basskin, a lawyer and industry insider, goes into great detail on the major labels resisting twenty years of collective societies fighting, and failing, to negotiate a situation where the labels take adequate measures to mechanically license works and pay due fees, royalties, and accrued interest.

What Sookman clearly overlooks is that, without factoring in any interest amounts, the dollar value of the pending list is increasing, as shown with the following two tables for mid-2008.

As is clear, there is an increase of C$1,101,987.83 in a three-month period. Should this rate of increase in the value of the pending list continue and Sony’s unvalued pending list be factored in, the CRIA’s four major labels will have an outstanding debt of at least C$73 million by end-2012 when the association’s Mechanical Licensing Agreement runs out.

Heat wave proves deadly for Nebraska cattle

Wednesday, July 1, 2009

Over 2,000 cattle died throughout eight counties in Nebraska last week as a result of an unexpected heat wave. Officials estimate that number could grow as other counties report in.

According to Tim Reimer of the United States Farm Service Agency, cattle nearing slaughter are difficult to keep cool due to their large size, and thus more vulnerable to heat. The animals are provided large quantities of water, but they sometimes stop drinking under the effects of the high temperatures.

The deaths worsened the situation for farmers, who were already struggling with high feed costs. “There were some that took some pretty substantial hits financially”, Reimer said.

Temperatures in eastern portions of the state soared into the mid 90s. The heat wave was preceded by an unusually cool spring, so the animals didn’t have a chance to acclimatise. Terry Mader, a professor at the University of Nebraska-Lincoln, reported that “Cattle, as well as other animals and humans, usually need two to four weeks to adapt to the changes in environmental conditions we observed last week. Sunny days with temperatures above the mid-80s can be stressful, particularly if there is no wind and humidity is above 50%.”

Similar heat waves occurred during the 1990s, when thousands of cattle were lost. Mader noted, “There’s no opportunity for them to get prepared […] Normally, you’ll have one to two days in a heat wave to get prepared.”

Mature cattle are generally worth US$1,000 apiece.

Qantas ordered to check oxygen cylinders

Sunday, July 27, 2008

Australian Transport Safety Bureau announced that an oxygen cylinder which was located near the area of the explosion on Qantas flight QF30 from London, England to Melbourne, Australia was unaccounted for but said that it was too early to say that an oxygen cylinder could be the cause of the mid-air explosion. It did say it had ruled out explosives as a cause stating that they “found no indication of explosives”.

The Civil Aviation Safety Authority has ordered Qantas to check all oxygen cylinders and the brackets which hold them on its Boeing 747s, but hasn’t ruled out that the order will be extended to all of the Qantas fleet.

Stock markets worldwide fall dramatically

Wednesday, September 17, 2008

Stock markets around the world, particularly those in the United States, have fallen dramatically today. This is due to the ongoing events in the financial world, including the bailout of large insurance firm AIG by the US Federal Reserve.

The primary UK index, the FTSE 100, dropped in value by 2.36%, which is 118.40 points, to below the 5000 mark at 4907.20. The Dow Jones was down 2.62% at 16:08 UTC, a slight increase from earlier today. The Dow Jones currently has a value of 10769.00 points. The Nasdaq index has fallen by 3.16% to 2138.14, while the Dax was 1.75% lower than the start of the day as of 16:08 UTC.

The Japanese index the Nikkei was one of the few to rise in value over the day. It ended up 1.2%, although this follows a large fall in the value of the index when it hit an all time low yesterday.

Darren Winder, a market analyst from Cazenove, said that “I don’t think anyone has got any or much confidence in market direction for more than a few days.”

A lot of today’s activities in the market were related to the takeover of the American International Group (AIG) on Tuesday in an US$ 85 billion loan, in exchange for a 79.9% stake in the company.

The fact that AIG has thousands of divisions engaged in business across the globe sets them apart from the recent problems with other banks. AIG was built up over the last several years via the buyouts and mergers of many companies around the world, offering AIG’s stockholders a diverse base of income which allowed it to steadily increase profits.

In addition, the markets have also had difficulties during the past week after the refusal of the Federal Reserve to bail out Lehman Brothers, forcing the company to file for bankruptcy on Monday after Bank of America (BoA) and Barclays PLC pulled out of negotiations over the weekend.

Sun retires the Sun Industry Standards Source License

Saturday, September 3, 2005

Yesterday, September 2, Sun Microsystems announced the retirement of the Sun Industry Standard Source License (SISSL) scheme. The Open Source Initiative had been discussing ways of reducing the quantity of Open Source licenses to make it easier for developers and companies to chose a license. Dropping the SISSL takes them one step closer to this goal. Sun’s decision to drop the SISSL comes a few months after Intel‘s similar decision to drop its Open Source License in March.

Simon Phipps, the director of Sun’s Open Source Office, said in his blog that he will ask the OSI to put the SISSL on the “not recommended” list. He also said “I’d encourage any project that’s currently using it to make other plans at the time of their next major release”.

No future Sun open-source projects will use the SISSL, and current Sun projects using a dual-license scheme will drop the SISSL “as soon as the development cycle allows”. One of Sun’s most popular open-source projects, OpenOffice.org, is licensed under both the LGPL and SISSL. As of September 2, all OpenOffice.org 2.0 code is now licensed exclusively under the LGPL.

Sun prefers the Community Development and Distribution License, a variant of the Mozilla Public License. Sun released OpenSolaris and the Glassfish Java server under the Community Development and Distribution License.

Meeting The Standards Of Closing Property Sales

By Jon Caldwell

Financing details have to be included in your offer so that the seller can evaluate them. The size of your down payment is part of the financing details that you need to provide; the larger the size of your down payment, the more likely the lender will approve your mortgage. Your offer should also state what kind of mortgage you’ll be getting (fixed rate or adjustable rate). Protecting yourself is another reason why you should include your financing information in your offer. Should the interest rate suddenly rise quickly, you might be paying a higher mortgage than you expected. Placing a maximum acceptable interest rate in your offer protects yourself from that instance.

It is easy to imagine the home of your dream but finding one is a different topic. Being meticulous could help in the process of locating your dream home if you’re really determined in living in a haven. In choosing a house, you have to be particular also of the benefits the place can give you. It would also be much better and enjoyable if you happen to share the dream home of your partner. In this way finding the right home would be in harmony thus making it easier. It would also be beneficial if you widen your search. You can ask around all you want. Be specific with details, it could be your permanent place so you might as well be thorough about it. It could not be an easy task but remember, it would be all worth it in the end.

Regardless of where you’re located in the US – even if it’s in a desert, by a river, or in the Midwestern plains – your home is at risk for flooding. Floods can happen to anybody at any place because of rising river water, flash floods, or rapid snow melt. Even if you think that a flood in your area is highly unlikely, you should consider getting a flood insurance policy. It’s fairly inexpensive, particularly in high-risk flood areas since the policy will be backed up by a federally insured mortgage. If your community is a participant, you can get flood insurance from an agent via the National Flood Insurance Program. Remember that flood insurance is easily transferable; you can assign your existing flood insurance policy to a buyer.

[youtube]http://www.youtube.com/watch?v=0fUOz3KhtfY[/youtube]

Taxes eat up a considerable amount of your income, but did you know that real estate gives you excellent tax breaks? Investing in real estate has many tax advantages over receiving a monthly wage. On Capital Gains Rates you already save a lot; on capital gains you only get taxed 15%, as opposed to the 35% for wage income. If you sell your residence, you also get an exemption if you’ve been living there for the last five years. You also get to deduct the interest you need to pay on debts you got from acquiring your real estate properties. You even get tax deductions for the wear and tear of your rental properties, even if the property’s value appreciates! There are so many tax advantages to investing in real estate. As long as you plan your income wisely, you’ll be able to save a lot.

Most real estate listings are informative but boring, and it’s the boring factor that keeps the house from selling. This happens because most people let their real estate broker do the listing, which only communicates with other brokers but not prospective buyers.

Take charge of your listing instead so it can grab attention. You can do this by making sure you have great pictures – and even if you don’t have great pictures to begin with, you can always use Photoshop to bring out the property’s excellent features. If your lawn is dead, use the paintbrush to color it green. If it’s a cloudy day, wait for blue skies before photographing your house. When a buyer scans the listing with the agent, you only have two seconds to grab his or her attention. Making a lasting impression is a must if you want to invite a viewing.

About the Author: Jon Caldwell is a professional content manager. Much of his articles can be found at realestatedailyblog.com

Source: isnare.com

Permanent Link: isnare.com/?aid=257866&ca=Real+Estate

Rachel Weisz wants Botox ban for actors

Tuesday, July 7, 2009

English actress Rachel Weisz thinks that Botox injections should be banned for all actors.

The 39-year-old actress, best known for her roles in the Mummy movie franchise and for her Academy Award-winning portrayal in The Constant Gardener, feels facial Botox injections leave actors less able to convey emotion and that it harms the acting industry as much as steroids harm athletes.

In an interview with UK’s Harper’s Bazaar, coming out next month, Weisz says, “It should be banned for actors, as steroids are for sportsmen,” she claims. “Acting is all about expression; why would you want to iron out a frown?”

HAVE YOUR SAY
Should Botox be banned for actors?
Add or view comments

Currently living in New York, she also mentions that English women are much less worried about their physical appearance than in the United States. “I love the way girls in London dress,” she claimed. “It’s so different to the American ‘blow-dry and immaculate grooming’ thing.”

2008 TaiSPO: Interview with Ideal Bike Corporation and Gary Silva

Friday, March 28, 2008

2008 Taipei International Cycle Show (Taipei Cycle) & Taipei International Sporting Goods Show (TaiSPO) not only did a best reunion with conjunctions of the launch of Taipei World Trade Center Nangang Exhibition and the concurrent cycling race of 2008 Tour de Taiwan but also provide opportunities and benefits for sporting goods, bicycle, and athlete sports industries to establish the basis of the sourcing center in Asia and notabilities on the international cycling race.

Although the Taipei cycle was split from the TaiSPO since 1988, but the trends of sporting good industry in Taiwan changed rapidly and multiply because of modern people’s lifestyles and habits. After the “TaiSPO Innovation Award” was established since 2005, the fitness and leisure industries became popular stars as several international buyers respected on lifestyle and health.

For example, some participants participated Taipei Cycle and TaiSPO with different product lines to do several marketing on bicycle and fitness equipments, this also echoed the “Three New Movements” proposed by Giant Co., Ltd. to make a simple bicycle with multiple applications and functions. As of those facts above, Wikinews Journalist Rico Shen interviewed Ideal Bike Corporation and Gary Silva, designer of “3G Steeper” to find out the possibilities on the optimizations between two elements, fitness and bicycle.