Archives 2023

By Debra Haydel

It is often hard to find just the right large quantity recipe for the theme of your party or for the “culinary experience” you are aspiring to offer your guests. Here are a few tips and suggestions on how to modify your favorite 4-6 serving recipes when you find yourself cooking for a crowd of 20 or more.

What constitutes a crowd? Of course it’s all relative (your relatives, not mine). Seriously, if you are accustomed to cooking for one to three, cooking for 20-50 people may seem overwhelming. When cooking for a crowd, there are three important considerations; adequate cookware, sufficient refrigerator space and recipe selection.

Obviously you should seek out recipes geared towards feeding a crowd. It is often easy to find large quantity recipes for basic dishes such as lasagna and mashed potatoes. But what do you do if you have your heart set on using your favorite 4-serving recipe for Corn and Black Bean Polenta for a party of 25?

Even for expert cooks, modifying a recipe for large quantity cooking is not just a matter of endless multiplications. If you expand a recipe too much–you are bound to run into trouble and end up with an off tasting or a poorly flavored dish.

For a basic dish like mashed potatoes, it would be acceptable to multiply all of the ingredients in a 4-serving recipe by two, thus doubling the recipe to serve 8. However, recipes are not indefinitely expandable (or shrinkable for that matter) and enlarging a recipe any more then 2-4 times is not recommended.

You may also use recipe converters which are easily found online. The converters however, simply “do the math”, multiplying each ingredient amount by the increased number of servings you enter into the converter. It does not take into account, for example, the pungency or texture of the ingredients. If a 4-serving recipe calls for 1 tablespoon of finely chopped rosemary and you want to triple the recipe to serve 12; 3 tablespoons of rosemary will probably overwhelm all the other flavors and seasonings in the dish.

It is a good idea to be cautious when multiplying ingredients like salt, flour, cornstarch, eggs, seafood, meats, robust herbs, oils, onions, garlic, celery and peppers. Some ingredients will impart enough flavor, texture or body when only increased a fraction. In addition some of these ingredients can be added a little at a time as you continually check for taste.

What if you want to serve 25 people with a not-so-simple, 4-serving recipe with numerous ingredients? Doubling or tripling more complex recipes could get complicated. One trick is to batch cook. Batch cooking requires planning ahead and cooking in advance. It may also mean freezing prepared dishes. It is also a matter of “doing the math”.

To serve 25 with a 4-serving recipe, you can cook 5-6 individual batches of that recipe or, you can expand the recipe (no more then 2-4 times) and cook in batches accordingly. For example, to serve 25 from a 4-serving recipe, double the recipe to 8 and cook three batches or, triple it and cook two batches. To serve 18 with a 6-serving recipe, cook it three times or cook one 6-serving batch and one batch that has been doubled to serve 12. You get the idea.

It is almost impossible to double or triple recipe ingredients for cakes, cookies, pie dough, or breads, without meeting with utter disaster. It’s a chemistry thing. Instead, prepare a single batch repeatedly until you have enough food to feed your guests. Again, cooking in advance is the key.

Chances are you can successfully double or triple the ingredients of recipes for individual appetizers, such as stuffed mushrooms or crostini; and for snack mixes, dips, salsas, punches, one serving-size pieces of meat, poultry or fish, tossed salads, pasta salads and vegetables dishes.

If you are cooking for a crowd of 25 or more you will most likely serve buffet style. It is the best way to serve larger crowds. On a buffet of numerous dishes, people will take smaller portions of each in order to sample everything. Also, not everyone will sample every dish. This means that every dish you prepare need not serve 25. You need only prepare a few large quantity dishes. Look for recipes that serve 8-12 and double them (or not).

With a calculator and a little ingredient know-how you can comfortably convert most of your party food recipes and present a tantalizing menu to your guests.

Have fun!

Debra Haydel

About the Author: Debra Haydel publishes chef-menus.com. This site contains recipes plus complete, coordinated menus for all special occasions. Go to chef-menus.com/cooking-for-a-crowd.html for more information on quantity cooking including a quantities chart to help with food shopping.

Source: isnare.com

Permanent Link: isnare.com/?aid=106440&ca=Food+and+Drinks

A Physical Mexican Restaurant in Las Vegas- In all other senses, a pilgrimage of taste

by

gardner

The country of Mexico makes a variety of ingredients and the sheer differentiation that exists in the tastes and preferences of the people of this huge country is remarkable. The cuisine has also been different in different states of this country even though the underlying fabric is the same. A Mexican Restaurant in Las Vegas aims to bring all the different tastes from the different states of the country to the people, who come to this city not just from all over the country but from all over the world.

Although many people only know about a few of the dishes served, like tortilla chips and tacos as Mexican food, there is more than what the mind can imagine and the palette can hold, when it comes to true Mexican cuisine. It has been shaped not only by the indigenous people who have been in Mexico for generations but even those whose forefathers came with the Spanish invaders. Thus, a Mexican restaurant in Las Vegas has in their midst, the opportunity to show case the best of both worlds to their patrons who come to them for a taste of authentic Mexican food.

Whether it is the use of indigenous spices or the use of honey in cakes and desserts, the taste of Mexican food cannot escape the connoisseur. It cannot even escape the one who may have just heard of it but is craving to try it and then be hooked on to it forever. Any Mexican restaurant that Las Vegas has can make the tourist revisit the land of a thousand tastes. A variety of spices can capture their senses as well as their tongue and stomach for a very long time to come.

It is said that the true taste of indigenous cuisine is the best when one visits those places and relishes the fare with locals. However, any Mexican restaurant in Las Vegas can transport the patron to the country that has introduced the world to a plethora of tastes and smells that the world knows as authentic Mexican cuisine. The cuisine that is beyond just tortillas and tacos or even burritos.

In the present times, when people see the whole world as a global village and one that is ever shrinking because of the worldwide web, it will be no surprise that a Mexican restaurant in Las Vegas will be the epitome of all that is about Mexican food.

Mexican restaurant Las Vegas

– Robertos Taco Shop they have began their career in the food industry they are now best Mexican Restaurants in Las Vegas. For more information, Visit the website!

Article Source:

ArticleRich.com

Submitted by: Rob Laird

Learning to drive a manual automobile isn’t easy for many people, but with time and practice it becomes second nature. The following tips can get anyone started in the correct course.

Obtain a driver’s licence first. You can submit an application through the DVLA (in the UK), and it generally takes two to three weeks to arrive through. When you’ve got your own licence, you can begin driving courses, or get a car, some insurance and a supervising driver and try it on your own. To begin with, obtaining guidance from a Driving Instructor can certainly make things much easier. To get your full licence, you must pass the theory test, then the driving test. In the United Kingdom, they are set by the Driving Standards Agency (DSA).

In the Ca

To begin with, look down at the floor; you will see 3 pedals. From right to left, these are: accelerator, brake and clutch (ABC).

Examine the straightforward diagram on top of the gears, that will show you where the gears will be. In most brand-new cars and trucks, this will look like a three-legged H. First, third and fifth gears are in the tops of the legs; second, fourth and reverse gears are at the bottoms. The crossbar of the H is neutral. In the event the car or truck has 6 forward gears, this will often be across the bottom, with reverse moving to the top left position.

Don’t do anything that is very quick, or sudden. Keep relaxed and assess each and every scenario as it comes up. For example, don’t switch lanes until you are absoulutely confident the coast is clear. Driving can be a nervous experience (especially at first). It is best to take your time and do the right thing at the best time.

Practice makes permanent. Good habits (such as turning your head to check on your blind spot) will stick…..bad habits (ignoring mirrors and coasting) will certainly stick too.

Tips on how to Move A Manual Ca

– Push on the clutch pedal and then move the gearshift into the neutral position.

– Start the car.

– Keeping the clutch pedal down, put the car or truck into first gear by means of moving the gearshift to the top-left position.

– Start to release the clutch pedal little by little; when you hear or feel the engine start to reduce, slowly but surely press down on the gas pedal as you continue to release the clutch.

– At this stage, release the handbrake and the car will begin to move forward.

And you’re off!

When you’ve passed your driving test (or should you be practicing in your car) there are other things to consider:

Be prepared. If you’ll be driving on a toll road or over a bridge, there might be charges, therefore be sure to have enough money.

If you are going to be parking your automobile on the street or car park, be sure you have cash for a parking ticket if it’s required.

Similarly, if you are driving in the winter, make sure that your car comes with the appropriate equipment for an emergency. Warm garments, a spade and snow chains might be useful. The same applies to driving in the heat of summer when water and sunglasses may help.

Never be caught with no spare tyre. Flat tyres happen regularly. You don’t wish to be stranded on the side of the street waiting for a recovery truck.

About the Author: Robert Laird is a fully qualified DSA Driving Instructor working in Chelmsford, Romford, the UK, Essex. He runs RPL Driving which offers driving assesments around Romford. If you would like for more information take a look at

rpldriving.com

Source:

isnare.com

Permanent Link:

isnare.com/?aid=1715382&ca=Automotive

These are most suitable for all types of business places that have wide outdoor areas. You can fix them in your restaurant so that customers can enjoy the best weather condition in winters as well. In addition to this, these are also the products of choice when you are running any kind of business that is mostly managed in an outdoor place. They will help to give a boom to your running business by offering your customers a perfect and balanced environment.However,commercial patio heatersare not only utilized at business places. These can also be a better option when your home have large outside place and you want to keep the entire area warm. In fact, domestic heaters are small in size and capacity of heat generation is also small therefore you can have maximum convenience through getting commercial outdoor heaters. These heaters are not merely used for heating tasks but in addition they help you to enhance the aesthetic appearance of your place dramatically. These are available in beautiful designs which can make the look of your area more appealing.You can buy the heaters which are either operated through propane or electricity. The electric heaters provide somewhat more convenience at a place which is widely exposed to winds. These are safer and better protected and so these can best perform in such conditions. However, the heaters that are operated by using propane are also built by keeping in view the highest level of safety and also wind shield. Propane based commercial outdoor heaters can be easily transferred from one place to another and so these are more portable. In case of electric one, you can place them only near electric facility.

Nowadays CBD oil is used in a wide range of products i.e. from edibles to medicines, massage creams to cosmetic products, etc. Just like the list of CBD products is endless the benefits obtained from CBD products are countless too. Just like CBD products are important in routine life, their presentation is also very important. In order to motivate the customers to buy your CBD products, you must make them visually attractive and fascinating. With the awareness of the benefits obtained from CBD products, many companies have trolled into this business. Different companies are manufacturing different CBD products in order to give a boost to their sales. To distinguish your CBD products from your rivals you must adopt strategies that can give you an edge over your competitors. Custom CBD Boxes made of cardboard or Kraft paper makes your CBD products unique and distinguished. Customers are also tempted to those products that have a unique and enticing appearance.

CBD boxes with unique printing designs

You can create your very own special CBD boxes in unique printing designs by using the latest printing techniques. The boxes can be made enticing and glamorous by using UV stamping, embossing, debossing or aqueous printing. You can also use graphic designing or creative artwork in order to make your Custom CBD Boxesartistic and eye-catchy. The choice of colors also plays a major role in grabbing customers’ attention. A blend of bright and delightful colors will definitely make your CBD products more prominent on the shelf. You can also print relevant images so that the customers can have a clear idea that what is the product about. Laminating your CBD boxes isn’t a bad choice at all. In fact, lamination protects your CBD boxes from stains and dust while lying on the shelf.

Making Custom CBD Boxes with a die-cut window prevents your CBD products from human tampering. If customers can easily see the packed merchandise, they will definitely come for more. The boxes can also be printed with important product details to let the customers have a clear idea of how to use the product.

Use rigid and recyclable packaging material for your CBD products

Who wants to sell damaged and broken goods? Who wants to lose customers and have declined sales? of course, no one. No one would want to deliver his customers spoiled or damaged goods in ordinary product boxes. Low-quality or substandard packaging boxes do more harm than good. These boxes collapse during shipping or storage and packed CBD products are spoiled too. CBD boxes made from rigid and strong cardboard or Kraft material can perfectly sustain the integrity of the packed merchandise. There is no risk of any damage to your CBD products inside these durable and strong boxes. Cardboard and Kraft paper are also eco-friendly that makes them recyclable in nature. Packaging materials that are recyclable can be used again and again without fearing for an increase in environmental pollution.

Use your CBD boxes to market your brand

You can effectively advertise your brand via exclusively designed CBD boxes. Your brand name and logo can be printed on your CBD boxes to distinguish your CBD boxes from your competitors. You can also print your brand’s slogan on these CBD boxes to impress the onlookers. Promoting your brand via your personalized product boxes has become the trendiest marketing strategy. Your brand identity is spread in the market and a unique impression of your brand and products is built in the minds of the customers. There are several companies that are producing unique and eye-catchy CBD boxes. The Custom Packaging Services is a unique and professional brand offering sustainable and fabulous CBD boxes to its clients. Eye-catchy and fascinating CBD boxes made by the experts of this company are difficult to find anywhere else. These spectacular CBD boxes will definitely give a boost to your sales and you can earn revenues instantly. Now you can enjoy the benefits of displaying your CBD products inside creative and glamorous CBD boxes at very pocket-friendly rates.

Traditional Open Spine Surgery VS Minimally Invasive Spine Surgery

by

Cedric Loiselle

Traditional Open Spine Surgery

To be able to do traditional open spine surgery, the neurosurgeons need to make an incision and open up layers of tissue so that it would be large enough not only to accommodate all the tools which are needed during the operation but also to allow the doctors to see what is inside the body. Although there minimally invasive spine surgery is now available, there are still doctors who still perform using the open procedure because most of the tools used for the operation are still too large to fit the small incision.

Due to the increase risks involved in open spinal procedure, a pressure on developing methods and tools that could be used in minimally invasive spine surgery is given to scientists and researchers of this field of medicine. Doctors and patients alike have high hopes that in the near future, these minimally invasive tools and methods would be developed so that less danger, stress, and fear would be felt.

Traditional Open Spine Surgery Procedure

Some procedures that still make use of the traditional open spine surgery include the anterior cervical discectomy and fusion, cervical foraminotomy, posterior lumbar interbody fusion, anterior lumbar interbody fusion, spinal fusion, cervical corpectomy, transforaminal lumbar interbody fusion, decompressive lumbar laminectomy, cervical laminoplasty, and many other.

Minimally Invasive Spine Surgery

In minimally invasive spine surgery, it is a must that the neurosurgeons pinpoint the exact location on where to make an incision so that they could have access to the part of the spine that needs the surgery. To make sure of this, they could use different imaging techniques such as X-rays or the MRI to help them see. They also use endoscopes, which could be inserted through the small incision that is made during the surgery. In addition to the endoscope, tools that are used during the surgery would also be able to fit the small incision so that the neurosurgeons would not need to make a larger one. Instead of scalpels, they would use lasers to cut or remove pieces of tissue or bone that may be causing the disease.

Although a lot of people might prefer this method because it is far less traumatic than the open surgery, people should also consider the rate of successful surgeries. It has not yet been proven that spine fusion treatments are better using this method so it is still safe to say that open spine surgery could still be better in this field.

Minimally Invasive Spine Surgery Procedures

With the discovery of minimally invasive spine surgery, the scientists have developed a few procedures which make use of this type of surgery. This includes kyphoplasty, endoscopic scoliosis surgery, microscopic discectomy, disc decompression, and vertebroplasty. All these methods are used to remove parts of the spine which could cause an increase in pressure in the surrounding nerves which would then cause the back pain that most patients experience. Back pain may be the main reason why most patients seek the help of a neurosurgeon to perform an operation on them.

For more information about

minimally invasive spine surgery

visit our website

sbsdocs.net/

.

Article Source:

Traditional Open Spine Surgery VS Minimally Invasive Spine Surgery